Cable bushings
Four, seven or ten lines to be fed through
The 'Cablefix One' cable entry system from Lütze offers industrial users a flexible solution for inserting cables into the control cabinet.
The technical background to this are pre-configured sealing inserts based on the 'onion ring' principle, which can be individually adapted depending on the cable diameter of 5 to 29 mm. The cable entries - optionally available for four, seven or ten cables to be fed through - are available as a complete set including sealing inserts. The cable entry system is also suitable for pre-assembled cables thanks to its user-friendly handling, space-saving design and reduced installation times. Protection class IP65 is met, strain relief in accordance with EN 62444 is provided as well as UL approval in accordance with 4X. The system is made entirely of flame-retardant materials. It is installed in just a few steps: The cables are pushed through the front of the push-through frame and the cut-out in the enclosure. The push-through frame is then screwed in place. Depending on the cable diameter, superfluous elements of the sealing set are removed and the sealing element is guided over the cable. Finally, the frame pressure plate and the front frame are fitted and securely screwed in place.
You might also be interested in
Channels can be parameterized as input or output
UR20-8DIO-P-3W-Diag from Weidmüller complements the supplier's 'u-remote' family. With the universal, digital I/O module, each individual channel can be parameterized independently as an input or output.
read more...Order in the data center
EasyLan, the brand of ZVK, an OEM manufacturer and developer of pre-assembled copper and fiber optic cables, now offers individual labeling for the majority of its products.
read more...Use on deep drilling rigs
Deep drilling rigs with top drive systems are used to extract oil from the earth. Until now, manufacturers and operators have relied on so-called 'service loops' to feed cables to the systems. Now there is a new solution from Igus.
read more...Suitable for sheet thicknesses from 1.5 to 2.5 mm
Icotek is expanding its range of tool-free mountable cable entry plates with the KEL-DP 6 and KEL-DP 16. They are suitable for sheet thicknesses from 1.5 to 2.5 mm and are available in round, square and narrow designs to fit standard standard...
read more...Specified according to Profinet guidelines
Provertha has expanded its range of M8/M12 circular connector solutions and now also offers M8 crimp CF connectors with 360° shielding with D-code in protection class IP67.
read more...Plug-in and screw-on variants
Icotek has expanded the QVT-Click cable gland product family to include metric sizes 16 and 20, which are pluggable and screwable. The series is suitable for introducing pre-assembled cables and, according to the manufacturer, offers a compact and...
read more...Three aluminum series
Rose manufactures three aluminum enclosure series, each developed for specific applications and made from the cast aluminum alloy AC-AlSi 12 (Fe). External mounting channels protect the electronics in the housing from chips.
read more...For load currents up to 16 A
Wiesemann & Theis is expanding its range of network-based 230 V remote switches to include two products with potential-free normally open and changeover contacts for load currents of up to 16 A.
read more...Cables and wires well protected
Fränkische Industrial Pipes is launching the Fiplock One Aspa-HV termination, pull-in and suspension adapter. The closed adapter is mounted on the end of the Fiplock corrugated conduit and protects cables/lines inside from dirt and mechanical...
read more...