Cable entry plates
Suitable for sheet thicknesses from 1.5 to 2.5 mm
Icotek is expanding its range of tool-free mountable cable entry plates with the KEL-DP 6 and KEL-DP 16. They are suitable for sheet thicknesses from 1.5 to 2.5 mm and are available in round, square and narrow designs to fit standard standard cut-outs.
The 'KEL-DP 6' size is based on the cut-out of the 6-pin connector measuring 36 mm x 52 mm; the 'KEL-DP 16' is based on the cut-out of the 16-pin connector measuring 36 mm x 86 mm. It can be used to feed through up to 23 cables, with the 'KEL-DP 6' the maximum is 25. A panel is fitted by pressing it into the punched-out frame. The position of the plate is also centered by the integrated spring bars. The cable entry plates achieve protection class IP64.
You might also be interested in
Channels can be parameterized as input or output
UR20-8DIO-P-3W-Diag from Weidmüller complements the supplier's 'u-remote' family. With the universal, digital I/O module, each individual channel can be parameterized independently as an input or output.
read more...Order in the data center
EasyLan, the brand of ZVK, an OEM manufacturer and developer of pre-assembled copper and fiber optic cables, now offers individual labeling for the majority of its products.
read more...Use on deep drilling rigs
Deep drilling rigs with top drive systems are used to extract oil from the earth. Until now, manufacturers and operators have relied on so-called 'service loops' to feed cables to the systems. Now there is a new solution from Igus.
read more...Specified according to Profinet guidelines
Provertha has expanded its range of M8/M12 circular connector solutions and now also offers M8 crimp CF connectors with 360° shielding with D-code in protection class IP67.
read more...Plug-in and screw-on variants
Icotek has expanded the QVT-Click cable gland product family to include metric sizes 16 and 20, which are pluggable and screwable. The series is suitable for introducing pre-assembled cables and, according to the manufacturer, offers a compact and...
read more...Three aluminum series
Rose manufactures three aluminum enclosure series, each developed for specific applications and made from the cast aluminum alloy AC-AlSi 12 (Fe). External mounting channels protect the electronics in the housing from chips.
read more...For load currents up to 16 A
Wiesemann & Theis is expanding its range of network-based 230 V remote switches to include two products with potential-free normally open and changeover contacts for load currents of up to 16 A.
read more...Cables and wires well protected
Fränkische Industrial Pipes is launching the Fiplock One Aspa-HV termination, pull-in and suspension adapter. The closed adapter is mounted on the end of the Fiplock corrugated conduit and protects cables/lines inside from dirt and mechanical...
read more...Precisely determine position and inclination
Sigmatek is expanding its 'S-Dias' portfolio with the BC 031 gyroscope sensor module, which provides rotation rate and linear acceleration information in three axes, allowing position and inclination to be determined precisely at any time.
read more...