Analog Devices GmbH

Website:	https://www.analog.com
Email:	[email protected]

Street:	Otl-Aicher-Straße 60-64
ZIP/City:	80807 München
Country:	DEUTSCHLAND

Phone:	089/76903-0
Fax:	089/76903-157

TSN/A Conference 2025 | September 24, 11:30... (www.computer-automation.de)

IEEE TSN Stream Configuration in UAFX Connection Manager

This talk elaborates on the OPC UA FX adoption of IEEE TSN as a transport layer, reflecting on UAFX integration of the CNC/CUC concept and network configuration.

IEEE TSN and Industrial Ethernet adoption challenges

It becomes evident that TSN adoption will happen over a period of time where new technology will coexist with legacy Ethernets and fieldbuses.
We would like to challenge the existing testbeds, plugfests, and IA vendors with accommodating the missing items, including support for most used industrial RTOSes, generic orchestration SW, and HW platforms, suitable to run most of the Industrial Automation use cases.

A Framework for modern Robot Applications

The ROS1 driver for Trinamic motor controllers from Analog Devices enables the seamless integration of intelligent actuators into ROS-supported robot systems. This article describes features, configuration options and application scenarios for robust use in industry and research.

The MicroPlyer Microstep Interpolator

Some Trinamic components are equipped with MicroPlyer technology. This interpolation technique allows existing systems with low microstep resolution to be upgraded to a higher resolution without modifying the motion control logic.

Mastering Precision

Stepper motors are vital in precision applications where there is a need for smooth movement and high resolution positioning. Recognizing the differences between fullstepping, halfstepping, and microstepping control is essential for meeting these requirements. This article closes the knowledge gap by summarizing the basics of microstepping.

New approaches for a secure networked future

Analog Devices will be presenting 16 different demos at embedded world 2024. These are intended to show the company's ability to deliver system solutions that enable it to differentiate itself in the market

SIL 3 solution based on SIL 2-compliant components

If a solution in accordance with Safety Integrity Level 3 (SIL 3) is to be implemented with SIL 2-compliant components, various challenges arise. With the publication of revision 3 of the IEC 61508 standard, it will be necessary to apply new methods.

Success through collaboration

With the ADI Catalyst, Analog Devices is taking a new approach to product and system development. In this interview, Martin Cotter, President Analog Devices EMEA, talks about cross-company development, deep trust and what Europe has to do with it.

25 years of Computer&Automation - The e-paper

For 25 years, Computer&Automation has accompanied the growing influence of IT in automation technology. Ultimately, IT and automation can no longer be clearly separated. In this anniversary issue, you can read about the importance that automation could have in the future.

Alan Lee becomes Chief Technology Officer

Analog Devices recently announced the appointment of Alan Lee to the position of Chief Technology Officer (CTO).

Development of isolated, software-configurable I/O channels

When developing isolated I/O systems for industrial applications, some key data such as power dissipation, data isolation and form factor must be taken into account. A software-configurable input/output module can help with this.

Choose your cover photo favorite of the year 2022

Which cover picture did you like best this year? Take part in a short survey and optionally in the prize draw for great prizes.

The next stage of evolution

In the future, machines will adjust their performance parameters independently with the help of AI-based observation algorithms. The value of a self-learning machine lies in its ability to maximize productivity, extend service life and reduce maintenance costs.

Analog Devices at the embedded world 2022

At the Analog Devices (ADI) booth, a wide range of embedded system technologies from various industries such as healthcare, automotive, industrial automation, energy and battery management technologies will be presented.

Vibration sensors for condition monitoring

When developing sensors for condition-based monitoring, single-pair Ethernet or 10BASE-T1L offers advantages such as smaller sensor dimensions, less complexity and cost-effective cabling. But what needs to be considered in the design?

Low-power processors to Ethernet

Single Pair Ethernet has a great future ahead of it in factory and process automation. But what needs to be considered when developing connections, especially for low-power field or edge devices?

Seamless networking right into the field

With 10BASE-T1L Single Pair Ethernet, a new Ethernet physical layer was adopted as a standard by the IEEE just over a year ago. This new standard will profoundly change process automation.

The autonomous industrial revolution

The fourth industrial revolution requires that the underlying technologies are continuously developed further. Automated and autonomous systems are key pillars.

The Next Cyber-Attack Could Be At Your Factory

As the surface of cyber attacks changes, the security risk and need for security solutions increases. It is imperative that factories adopt a resilient stance against cyber attacks.

Delivering the Connected Enterprise for Industry 4.0

Industry 4.0 future scenarios in 2025: Industry 4.0 migration process in large companies. The benefits of Industry 4.0 are obvious: more data, better analysis capabilities, informed decisions, all leading to increased productivity.

Security at the edge

Experts warn that it is not a question of whether a company or production facility will be the target of a cyber attack, but when. The shifting attack surface for cyber attacks is creating a growing need for security solutions at the edge.

Integrating signal chains into semiconductors

Analog Devices is presenting new technologies for data acquisition at Embedded World. In addition to simulation software, the company will also be demonstrating hardware platforms.

Entry into the IE business

With the new 'ADI Chronous' brand, Analog Devices wants to have a major say in Industrial Ethernet (IE) in the future. Kevin Carlin, Vice President Industrial Automation & Energy at ADI, explains exactly what this plan looks like.

Entering the IE business

With the new brand 'ADI Chronous', Analog Devices wants to have an important say in the area of Industrial Ethernet (IE) going forward. Kevin Carlin, Vice President Industrial Automation & Energy at ADI, provides more insight.

News about TSN & OPC UA

OPC UA is now finding its way into new products across the board. But more and more companies are also including the term TSN in their product descriptions. The picture gallery presents some of these innovations.

OPC UA and TSN even more flexible as a duo

OPC UA forms a universal application interface thanks to its address space, whereas TSN supplements standard Ethernet with real-time properties and allows data transfer rates in the gigabit range. It therefore makes sense to combine the two technologies.

TSN - Real-time Ethernet

TSN - the real-time extension of standard Ethernet - was a hot topic at Hannover Messe 2017. Four short trade fair videos document how quickly the technology could find its way into the industry and the benefits of using it.