
Bidirectional energy meters
The bidirectional energy analyzer for single-phase systems 'EM511' complements the 'EM500' energy meter series from Carlo Gavazzi.
Articles and background information on the topic

The bidirectional energy analyzer for single-phase systems 'EM511' complements the 'EM500' energy meter series from Carlo Gavazzi.

Puls is expanding the 'Dimension' product family with three DIN rail power supply units with 240 W or 480 W output power and integrated Ethercat interface.

Switch cabinets for the 24 V (DC) supply require a lot of space due to the components installed and the space required to cool the modules. E-T-A therefore offers a space-saving solution for power supply, overcurrent protection and power distribution.

The electronic circuit breakers from Wago for 24 V(DC), with four 4 (787-3664) and eight (787-3668) channels, are used in all industries with sensors and actuators and other electrical loads in the 24 V(DC) range.

The DC energy meter 'DCT1' from Carlo Gavazzi with an update time of 200 ms with serial communication and a measured value resolution of 0.1 Wh is designed for DC systems up to 1000 V(DC) and a charging current of up to 600 A(DC).

With the N8900A series devices from Keysight, Meilhaus Electronic now also has the top models of the N DC power supply series (N5700A, N8700A, N8900A) in its range.

The 'Acti9 AFDD' protective device from Schneider Electric offers safety for buildings of all sizes by combining the protective functions of AFDD (fire circuit breaker), residual current and miniature circuit breakers and mains voltage monitoring in a single device.
Depending on the environmental conditions or customer preference, automation systems from different suppliers must be used in the machine and process industry - a challenge! What does this mean in the area of 24 V (DC) power distribution?

Block is expanding its portfolio in the field of uninterruptible power supplies with four new combination UPSs.

The BE-DCEB10A DC inrush current limiter from Bicker Elektronik protects against high currents that occur when capacitive DC loads are switched on and can damage the power supply or trigger fuse elements.