
Installation behind the safety edges
Redur launches the 4R21.3 plug-in cable transformer. The 4R21 small signal converters from the 'Regulus' series are available for primary rated currents from 50 to 500 A and a round conductor dimension of 21 mm.

Redur launches the 4R21.3 plug-in cable transformer. The 4R21 small signal converters from the 'Regulus' series are available for primary rated currents from 50 to 500 A and a round conductor dimension of 21 mm.

The 'PEL-4124-013-01' power supply from Block combines a power supply unit with buffering in one housing. This integrated uninterruptible power supply (UPS) offers additional safety and system availability in the event of short-term power failures.
It is becoming more important for manufacturing companies to reduce CO2 emissions. This should start with improving energy efficiency. After all, every kilowatt hour saved does not have to be generated or substituted. Energy and production data show starting points.

With the N8900A series devices from Keysight, Meilhaus Electronic now also has the top models of the N DC power supply series (N5700A, N8700A, N8900A) in its range.

Puls takes over Wiferon and thus all existing contracts, trademark rights and patents of the wireless charging specialist. In the medium term, users will benefit from Puls' global production capacities.
At Hannover Messe 2023, there was a lot of publicity for direct current (DC), as it could make an important contribution to the energy transition and sustainability, as the use of DC grids significantly reduces energy requirements in existing systems. The status quo.

The energy transition requires the rapid conversion and expansion of the electricity infrastructure, which increases the demand for low-voltage switchgear. The Rittal Application Center offers customers support in automating their processes when setting up switchgear.

Problems at Gamesa again and again
The problems with wind power are causing Siemens Energy record losses. Perhaps too much speed is also to blame, they say. Many answers about the future will now take until November.

People are overexploiting nature. From the beginning of August, they are living on credit. Some things could be changed quite easily, say environmental and climate activists.

B+K Precision's 'BK9240' series devices are universal DC power supplies whose multi-range power supplies extend the rated power from a point to a curve, delivering up to 200W over a wider range of voltage/current combinations.
Depending on the environmental conditions or customer preference, automation systems from different suppliers must be used in the machine and process industry - a challenge! What does this mean in the area of 24 V (DC) power distribution?
At E-T-A, the year 2023 will be marked by the company's 75th anniversary. Ralf Dietrich, Member of the Management Board, reveals more about the 'ups and downs' of this period.

The industry is stepping up its tone towards the federal government. Impatience is palpable at the annual congress. Companies want clarity from the federal government on how to proceed.

The DC-Industrie2 project recently came to an end and the follow-up project, ODCA, has been launched. In an interview with Andrea Gillhuber, Dr. Hartwig Stammberger and Dr. Jan Stefan Michels talk about the potential of DC technology and its importance on the road to climate neutrality.

Econ Solutions presents the energy management software econ4 with the latest addition 'econ live' for instantaneous values of any measurement data in real time.

Interview with Karsten Fuchs, Lapp
What are the prospects for DC voltage technology in industry? Andreas Mühlbauer spoke about this with Karsten Fuchs, research engineer in the Innovation and Advanced Technology department at Lapp Holding.

Block is expanding its portfolio in the field of uninterruptible power supplies with four new combination UPSs.
The energy infrastructure in Germany is designed for alternating voltage. However, a DC voltage supply would be particularly advantageous in industry. The DC Industry project funded by the BMWK is committed to DC infrastructures in industrial plants. An overview.

Direct current research project
The DC-INDUSTRIE2 research project came to an end after seven years. The project investigated the potential of direct current technology for industrial production facilities. A follow-up project is already underway.

The BE-DCEB10A DC inrush current limiter from Bicker Elektronik protects against high currents that occur when capacitive DC loads are switched on and can damage the power supply or trigger fuse elements.