Icotek has developed the robust KEL-DPU cable entry plate for non-terminated cables. According to the supplier, it offers good strain relief and a high packing density and can be mounted quickly by screwing or snapping on without tools. The hard plastic frame is completely overmolded with elastomer, which ensures high stability and a smooth surface free of dirt niches. The materials of the cable entry plate are also Ecolab-tested. Tapered grommet pots at the rear guide the cables through the membrane, provide a double seal at the grommet with IP65/IP66 or NEMA 4X and provide strain relief. Up to 32 cables with diameters from 3.2 to 20.5 mm can be fed through the cable gland plate. To fit electrical or pneumatic cables, the membrane simply needs to be pierced and the cable pushed through. The cable gland can be screwed directly to the switch cabinet or housing or snapped onto the cut-out. The protrusion is 14.5 mm.